Material Characterization
Dynamic Test (Metal)
- Low Cycle Fatigue
- High Cycle Fatigue
- Fracture Toughness Test
- Fatigue Crack Growth rate test
- Tension – Tension Test
- Compression – Compression Test
- S/N & EN Curve generation
Static Test (Metal)
- Tensile Test
- Compression Test
- Pull out Test
- Push out test
- Bending Test
- Impact Test
- Hardness Test
Chemical Test (Metal)
- X Ray fluorescence Spectrometer
- Optical Emission Spectrometer
- Portable Emission Spectrometer
- Laser Induced Breakdown Spectroscopy
Material Test (Foam)
Latex Foam
- Air ageing, Compression deflection
- Load deflection, Flexing
- Low temperature properties, Static fatigue
Vinyl Chloride Polymers and Copolymers
- Compression deflection
- Water absorption
Sponge or Expanded Rubber
- Compression deflection, Heat resistance
- Fluid resistance, Compression set
- Water absorption, Ozone resistance
Material Test (Plastic)
- Tensile, Elongation and Modulus Properties
- Flexural strength & Flexural Modulus
- Izod Impact Strength
- Charpy Impact Strength
- Hardness (Durometer)
- Rockwell Hardness
- Density and Specific Gravity
- Melt Flow Rate or Melt Flow Index
- Vicat Softening temperature of plastics
- Deflection Temperature of Plastic
- Rate of Burning and/or Extent
- Water Absorption of Plastics
- Tear Resistance Tear-Propagation Resistance
- Identification of Polymer
Material Test (Rubber)
- Hardness (Durometer)
- Tensile, Elongation and Modulus Properties
- Tear Resistance
- Compression Set Method B and deflection
- Accelerated ageing tests – Heat ageing
- Water/Oil/Fuel/Chemical Resistance of Rubber
- Adhesion to a Flexible/Rigid Substrate
- Abrasion Resistance (Rotary Drum Abrader)
- Crack growth – De Mattia
- Rebound Resilience – Vertical
- Ozone Cracking – Static, outdoors, Dynamic
Product Testing
- Thermal Cycling
- Thermal Shock
- Thermal – Humidity Test
- Thermal Endurance Test
- Ingress Protection Test
- Solar Radiation Test
- Altitude Test
- Weathering Test
- Corrosion Test
- Drop Test
- Stone Impact Test
- Chemical Resistance Test
- Seat Testing
- Seat Benchmarking and Analysis
- Endurance Testing
- BIW Testing
- Testing of axle suspension brackets
- Leaf Spring, Bump Stopper Testing
- Rotary Fatigue Test With Reversible Torque
- Damper Performance Test
- Heat Impact Test
- Full Frame Fatigue Test of Chassis Frame
- Durability Test
- Vibration Test
- Vibration Field Measurement
- Mechanical Shock Test
- Noise Testing
- Modal Analysis
- Operational Deflection Shape
- Transfer Path Analysis
- Transmission Loss
- Transient Acoustic Holography
- High Speed Wind Tunnel Testing
- Low Speed Wind Tunnel Testing
- Cold Step Test
- Hot Step Test
- Thermal Cycling Test
- Vibration Step Test
- Combined V + T
- Full Vehicle Crash Test Facility
- Advanced Deceleration Sled Test
- Airbag Deployment Test
- Side Door Intrusion & Bumper Test
- Commercial Vehicle Testing
- Electric Motor Testing
- Pump Testing
- Accelerated Life Test
- Restriction of Hazardous Substances
- Bio-compatibility Testing
- Microbiology & Sterility
- 3D Scanning
- Reverse Engineering
Certification Support
Active Safety
- Seat Belt assemblies & anchorages
- Seats, their anchorages & head restraint
- Fuel tanks
- Hood latch
- Interior fittings
- Door lock
- RUPD, SUPD, FUPD
- Temporary cabin
- Survival space
Certification Support
- Product certificates according to ENEC and IEC
- E Marking, CE Certification, FCC, IC.
- Safety certifications like CB, CTUVS.
- EC/EU design examination certificates
- EC/EU certificates of conformity
- Certificates of conformity according to European directives
- Global certification
- Certification through Third Party Partner
CMVR Type approvals
- Two, three and four-wheeled vehicles
- Vehicles running on CNG / LPG, Alternate fuels
- Battery Operated Vehicles, E rickshaw, E cart
- Construction Equipment Vehicles
- Agricultural Tractor
- Safety Components / Systems / Sub-systems
- Bus Body Construction
- Truck Body Construction
- Trailer Construction
- Ambulance Code
- Motor Caravan
- Vehicular Crash
- Fuel Efficiency of Vehicles
Passive Safety
- External & Internal Exhaust Emissions
- EMI / EMC
